Alcatel-Lucent OmniSwitch 6250

To Next Page

To Previous Page

QoS Commands

OmniSwitch CLI Reference Guide November 2009 page 38-31

qos flush

Deletes all pending policy information. This command is different from qos revert, which returns the

pending policy configuration to its last applied settings.

qos flush

Syntax Definitions

N/A

Defaults

N/A

Platforms Supported

OmniSwitch 6250

Usage Guidelines

• If you enter this command, the pending policy configuration is completely erased. If you then enter qos

apply, the erased configuration overwrites the applied policies and you will erase all of your policy

configuration.

Note. Do not use this command unless you want to erase all of your policy configuration and start config-

uring new policies.

• Use the qos revert command to return the pending policy configuration to its last applied value.

• Policy configuration includes the following commands:

Examples

-> qos flush

Release History

Release 6.6.1; command was introduced.

base commands

policy rule

policy network group

policy service

policy service group

policy mac group

policy port group

policy condition

policy action

Alcatel-Lucent OmniSwitch 6250 - Qos Flush