QoS Commands
OmniSwitch CLI Reference Guide November 2009 page 38-67
Release History
Release 6.6.1; command was introduced.
Related Commands
Drops The number of Layer 2 or Layer 3 flows that were dropped.
L2 The number of Layer 2 events, matches, and drops.
L3 Ingress The number of Layer 3 ingress events, matches, and drops.
L3 Egress The number of Layer 3 egress events, matches, and drops
IGMP join The number of multicast events, matches, and drops.
Fragments The number of fragments dropped.
Bad Fragments The number of fragments received with an offset of 1.
Unknown Fragments The number of out-of-order fragments received.
Sent NI messages The number of messages sent to network interfaces.
Received NI messages The number of messages received by network interfaces.
Failed NI messages The number of failed message attempts to network interfaces.
Load balanced flows The number of Server Load Balance flow entries.
Reflexive flows The number of reflexive flows.
Reflexive correction The number of reflexive flow corrections.
Flow lookups The number of flow table lookups.
Flow hits The number of flow table lookup hits.
Max PTree nodes The highest number of nodes in the classifier tree.
Max Ptree depth The length of the longest path in the classifier tree.
Spoofed Events The number of spoofed events.
Nonspoofed Events The number of nonspoofed events.
DropServices The number of TCP/UDP flows dropped.
qos stats reset Resets QoS statistic counters to zero.
output definitions (continued)
To Next Page
Loading...
