QoS Policy Commands
page 39-12 OmniSwitch CLI Reference Guide November 2009
Examples
-> policy network group webgroup1 10.10.12.5 10.50.3.1
-> policy network group webgroup1 no 10.10.12.5
-> no policy network group webgroup1
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSNetworkGroupsTable
alaQoSNetworkGroupsName
alaQoSNetworkGroupsSource
alaQoSAppliedNetworkGroupsTable
alaQoSAppliedNetworkGroupsName
alaQoSAppliedNetworkGroupsSource
alaQoSNetworkGroupTable
alaQoSNetworkGroupIpAddr
alaQoSNetworkGroupsIpMask
alaQoSAppliedNetworkGroupTable
alaQoSAppliedNetworkGroupIpAddr
alaQoSAppliedNetworkGroupsIpMask
policy condition Configures a policy condition. A network group may be configured as
part of a policy condition.
qos apply Applies configured QoS and policy settings to the current configuration.
show policy network group Displays information for policy network groups.
To Next Page
Loading...
