Network Time Protocol Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 5-11
ntp key load
Loads the current key file into memory.
ntp key load
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• This command reloads the key file into the switch memory. This allows for new keys in the key file to
be added to the list of keys the switch can use for authentication.
• Newly added keys must be labeled as trusted with the ntp key command before being used for
authentication.
Examples
-> ntp key load
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaNtpAccessRereadkeyFile
ntp key Labels the specified authentication key identification as trusted or
untrusted.
ntp server Specifies an NTP server from which this switch will receive updates.
To Next Page
Loading...
