QoS Policy Commands
page 39-14 OmniSwitch CLI Reference Guide November 2009
Examples
-> policy service group servgroup2 telnet ftp
-> policy service group servgroup2 no telnet
-> no policy service group servgroup2
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSServiceGroupsTable
alaQoSServiceGroupsName
alaQoSServiceGroupsSource
alaQoSAppliedServiceGroupsTable
alaQoSAppliedServiceGroupsName
alaQoSAppliedServiceGroupsSource
alaQoSServiceGroupTable
alaQoSServiceGroupServiceName
alaQoSAppliedServiceGroupTable
alaQoSAppliedServiceGroupServiceName
qos apply Applies configured QoS and policy settings to the current configuration.
policy service Configures a service that may be used as part of a policy service group.
policy condition Configures a policy condition. A network group may be configured as
part of a policy condition.
show policy service group Displays information for policy service groups.
To Next Page
Loading...
