QoS Policy Commands
OmniSwitch CLI Reference Guide November 2009 page 39-59
Related Commands
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSConditionSourceTcpPort
alaQoSConditionSourceTcpPortEnd
alaQoSAppliedConditionTable
alaQoSAppliedConditionName
alaQoSAppliedConditionSourceTcpPort
alaQoSAppliedConditionSourceTcpPortEnd
qos apply Applies configured QoS and policy settings to the current configuration.
policy condition Creates a policy condition.
show policy condition Shows information about policy conditions configured on the switch.
To Next Page
Loading...
