Session Management Commands
page 6-4 OmniSwitch 6250 CLI Reference Guide November 2009
session login-timeout
Sets or resets the amount of time the user can take to accomplish a successful login to the switch. If the
timeout period is exceeded, the TCP connection is closed by the switch.
session login-timeout seconds
Syntax Definitions
seconds The number of seconds the switch allows for the user to accomplish a
successful login. Valid range is from 5 to 600 seconds.
Defaults
Login timeout default is 55 seconds.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> session login-timeout 30
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionMgr
sessionLoginTimeout
show session config Displays Session Manager information such as banner file name,
session timeout value, default prompt value, login timer, and login
attempt number.
session login-attempt Sets or resets the number of times a user can attempt unsuccessfully
to log into the switch before the TCP connection is closed.
session timeout Configures the inactivity timer for a CLI, HTTP (including Web-
View), or FTP interface. When the switch detects no user activity
for this period of time, the user is logged off the switch.
To Next Page
Loading...
