QoS Policy Commands
page 39-182 OmniSwitch CLI Reference Guide November 2009
show policy service
Displays information about pending and applied policy services.
show [applied] policy service [service_name]
Syntax Definitions
applied Indicates that only services that have been applied should be displayed.
service_name The name of the service for which you want to display information; or a
wildcard sequence of characters for displaying information about
services with similar names. Use an asterisk (*) to indicate a wildcard
character.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Information about all policy services is displayed unless service_name is specified.
• The display may include any of the following characters:
Examples
-> show policy service
Service Name From IPProto ScrPort DstPort
telnet_service cli 6 (TCP) 23
+ftp_service cli 6 (TCP) 21
test_service cli 6 (TCP) 21
-> show policy service telnet_service
Service Name From IPProto ScrPort DstPort
telnet_service cli 6 (TCP) 23
-> show applied policy service
Service Name From IPProto ScrPort DstPort
telnet_service cli 6 (TCP) 23
test_service cli 6 (TCP) 21
character definition
+ Indicates a new policy service.
- Indicates the policy service is pending deletion.
# Indicates that the policy service differs between
the pending/applied services.
To Next Page
Loading...
