QoS Policy Commands
OmniSwitch CLI Reference Guide November 2009 page 39-183
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSServiceTable
alaQoSServiceName
alaQoSServiceSource
alaQoSServiceIpProtocol
alaQoSServiceSourceIpPort
alaQoSServiceDestinationIpPort
alaQoSAppliedServiceTable
alaQoSAppliedServiceName
alaQoSAppliedServiceSource
alaQoSAppliedServiceIpProtocol
alaQoSAppliedSourceIpPort
alaQoSAppliedServiceDestinationIpPort
output definitions
Service Name The name of the port group, configured through the policy service
command.
From The way the service was configured: blt indicates a built-in entry; cli
indicates that the entry was configured on the switch; ldap indicates the
entry was configured through PolicyView.
IPProto The IP protocol associated with the service.
ScrPort A source port associated with the service.
DstPort A destination port associated with the service.
policy service Configures a service that may be used as part of a policy service group.
To Next Page
Loading...
