QoS Policy Commands
page 39-184 OmniSwitch CLI Reference Guide November 2009
show policy service group
Displays information about pending and applied policy service groups.
show [applied] policy service group [service_group]
Syntax Definitions
applied Indicates that only service groups that have been applied should be
displayed.
service_group The name of the service group for which you want to display informa-
tion; or a wildcard sequence of characters for displaying information
about service groups with similar names. Use an asterisk (*) to indicate
a wildcard character.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Information for all policy service groups displays unless service_group is specified.
• The display may include any of the following characters:
Examples
-> show policy service group
Group Name: From Entries
serv_group1 cli telnet
ftp
serv_group2 cli telnet
character definition
+ Indicates a new policy service group.
- Indicates the policy service group is pending deletion.
# Indicates that the policy service group differs between
the pending/applied service groups.
To Next Page
Loading...
