QoS Policy Commands
OmniSwitch CLI Reference Guide November 2009 page 39-185
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSServiceGroupsTable
alaQoSServiceGroupsName
alaQoSServiceGroupsSource
alaQoSAppliedServiceGroupsTable
alaQoSAppliedServiceGroupsName
alaQoSAppliedServiceGroupsSource
alaQoSServiceGroupTable
alaQoSServiceGroupServiceName
alaQoSAppliedServiceGroupTable
alaQoSAppliedServiceGroupServiceName
output definitions
Group Name The name of the port group, configured through the policy service
group command.
From The origin of the service group: cli indicates that the entry was config-
ured on the switch; ldap indicates the entry was configured through
PolicyView.
Entries The services associated with the group. Services are configured through
the policy service command.
policy service group Configures a service group and its associated services. A service group
may be attached to a policy condition.
To Next Page
Loading...
