QoS Policy Commands
page 39-188 OmniSwitch CLI Reference Guide November 2009
show policy port group
Displays information about pending and applied policy port groups.
show [applied] policy port group [group_name]
Syntax Definitions
applied Indicates that only policy port groups that have been applied should be
displayed.
group_name The name of the policy port group for which you want to display infor-
mation; or a wildcard sequence of characters for displaying information
about port groups with similar names. Use an asterisk (*) to indicate a
wildcard character.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Information for all policy port groups displays unless group_name is specified.
• The display may include any of the following characters:
Examples
-> show policy port group
Group Name: From Entries
Slot01 blt
Slot02 blt
Slot03 blt
Slot04 blt
Slot05 blt
Slot06 blt
Slot07 blt
character definition
+ Indicates a new policy port group.
- Indicates the policy port group is pending deletion.
# Indicates that the policy port group differs between
the pending/applied port groups.
To Next Page
Loading...
