Session Management Commands
page 6-10 OmniSwitch 6250 CLI Reference Guide November 2009
session xon-xoff
Enables/disables the XON-XOFF protocol on the console port.
session xon-xoff {enable | disable}
Syntax Definitions
enable Enables XON-XOFF on the console port.
disable Disables XON-XOFF on the console port.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The switch may interpret noise from an RS232 line as Control-S (XOFF). If the session console xon-xoff
command is enabled, traffic to the console port may be stopped.
Examples
-> session xon-xoff enable
-> session xon-xoff disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionXonXoffEnable
parameter default
enable | disable disable
show session xon-xoff Displays whether the console port is enabled or disabled for XON-
XOFF.
To Next Page
Loading...
