IP Multicast Switching Commands
page 41-76 OmniSwitch 6250 CLI Reference Guide November 2009
show ip multicast forward
Displays the IP Multicast Switching and Routing forwarding table entries for the specified IP multicast
group address or all the entries if no IP multicast group address is specified.
show ip multicast forward [ip_address]
Syntax Definitions
ip_address IP multicast group address.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ip multicast forward
Total 1 Forwards
Ingress Egress
Group Address Host Address Tunnel Address VLAN Port VLAN Port
---------------+---------------+---------------+-----+-----+-----+------
228.0.0.1 1.0.0.2 0.0.0.0 1 2/1 1 2/23
-> show ip multicast forward 228.0.0.1
Ingress Egress
Group Address Host Address Tunnel Address VLAN Port VLAN Port
---------------+---------------+---------------+-----+-----+-----+------
228.0.0.1 1.0.0.2 0.0.0.0 1 2/1 1 2/23
Output fields are described here:
Release History
Release 6.6.1; command was introduced.
output definitions
Group Address IP group address of the IP multicast forward.
Host Address IP host address of the IP multicast forward.
Tunnel Address IP source tunnel address of the IP multicast forward.
VLAN VLAN associated with the IP multicast forward.
Port The slot and port number of the IP multicast forward.
To Next Page
Loading...
