IP Multicast Switching Commands
page 41-86 OmniSwitch 6250 CLI Reference Guide November 2009
show ipv6 multicast
Displays the IPv6 Multicast Switching and Routing status and the general configuration parameters on the
specified VLAN or on the system if no VLAN is specified.
show ipv6 multicast [vlan vid]
Syntax Definitions
vid VLAN for which to display the configuration.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ipv6 multicast
Status: = Enabled
Querying: = Disabled
Proxying: = Disabled
Spoofing: = Disabled
Zapping: = Disabled
Querier Forwarding: = Disabled
Version: = 1
Robustness: = 2
Query Interval (seconds): = 125
Query Response Interval (milliseconds): = 10000
Last Member Query Interval (milliseconds): = 1000
Unsolicited Report Interval (seconds) = 1,
Router Timeout (seconds): = 90
Source Timeout (seconds): = 30
To Next Page
Loading...
