Alcatel-Lucent OmniSwitch 6250 - Show Ipmvlan Port-Config

IP Multicast VLAN Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 42-19
show ipmvlan port-config
Displays the sender and receiver IPMVLANs for a specific slot or port.
show vlan ipmvlan port-config [slot/port | agg_num]
Syntax Definitions
slot/port The slot number for the module and physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
agg_num The Link aggregate ID number. The valid range is 0–31.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show vlan ipmvlan port-config 2/1
ipmvlan type
+---------+------------+
50 receiver
-> show vlan ipmvlan port-config 2/2
ipmvlan type
+---------+------------+
51 receiver
100 receiver
-> show vlan ipmvlan port-config 1
ipmvlan type
+---------+------------+
101 sender
Release History
Release 6.6.1; command was introduced.
output definitions
ipmvlan The numerical IPMVLAN ID.
type The type (sender or receiver) of the IPMVLAN port.