AAA Commands
page 43-4 OmniSwitch 6250 CLI Reference Guide November 2009
Usage Guidelines
• A host name (or IP address) and a secret are required when configuring a server.
• The server and the backup server must both be RADIUS servers.
• Use the no form of the command to remove a RADIUS server from the configuration. Only one server
may be deleted at a time.
Examples
-> aaa radius-server pubs2 host 10.10.2.1 key wwwtoe timeout 5
-> no aaa radius-server pubs2
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
aaaServerTable
aaasProtocol
aaasHostName
aaasIpAddress
aaasHostName2
aaasIpAddress2
aaasRadKey
aaasRetries
aaasTimout
aaasRadAuthPort
aaasRadAcctPort
show aaa server Displays information about AAA servers.
aaa authentication Specifies the AAA servers to be used for Authenticated Switch
Access.
aaa accounting session Specifies the accounting servers to be used for Authenticated
Switch Access.
To Next Page
Loading...
