AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-5
aaa tacacs+-server
Configures or modifies a TACACS+ server for Authenticated Switch Access.
aaa tacacs+-server server [host {hostname | ip_address} {hostname2 | ip_address2}] [key secret]
[timeout seconds] [port port]
no aaa tacacs+-server server
Syntax Definitions
server The name of the TACACS+ server.
hostname The host name (DNS name) of the primary TACACS+ server. The host
name or IP address is required when creating a server.
ip_address The IP address of the primary TACACS+ server. An IP address or host
name is required when creating a server.
hostname2 The host name (DNS name) of an optional backup TACACS+ server.
ip_address2 The IP address of an optional backup TACACS+ server.
secret The shared secret known to the switch and the server, but which is not
sent over the network. Can be any text or hexadecimal string but MUST
match the secret configured on the server. The secret is case-sensitive.
required when creating a server.
seconds The timeout for server replies to authentication requests.
port The port number for the primary TACACS+ server.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the no form of the command to remove a TACACS+ server from the configuration. Only one
server may be deleted at a time.
• A host name (or IP address) and a secret are required when configuring a server.
• The server and the backup server must both be TACACS+ servers.
parameter default
seconds 2
port 49
To Next Page
Loading...
