Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-25
kill
Kills an active session. The command takes effect immediately.
kill session_number
Syntax Definitions
session_number Number of the session you want to kill.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the who command to obtain the session number variable.
• You cannot kill your own session.
• You cannot kill a connected session where the user has not yet completed the login process. These
sessions appear with username “(at login)” when displayed with the who command.
Examples
-> kill 3
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
SessionMgr
sessionIndex
sessionRowStatus
who Displays all active login sessions (e.g., Console, Telnet, FTP,
HTTP, Secure Shell, and Secure Shell FTP).
To Next Page
Loading...
