AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-33
user password-expiration
Configures an expiration date for all user passwords stored locally on the switch or disables password
expiration.
user password-expiration {day | disable}
Syntax Definitions
day The number of days before locally configured user passwords will
expire. The range is 1 to 150 days.
disable Disables password expiration for users configured locally on the switch.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• The user password-expiration command sets a default password expiration for users configured
locally on the switch.
• Password expiration may be configured on a per-user basis through the user command; the user setting
overrides the user password-expiration setting until the user password is changed or the user
password-expiration command is entered again.
Examples
-> user password-expiration 2
-> user password-expiration disable
Release History
Release 6.6.1; command was introduced.
Related Commands
parameter default
day | disable disable
user Configures entries in the local user database. May be used by a system
administrator to change any user’s password in addition to configuring
user privileges or profile.
show user password-expiration Displays the expiration date for passwords configured for user accounts
stored on the switch.
show user password-policy Displays the global password policy configuration for the switch.
To Next Page
Loading...
