AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-67
show user
Displays information about all users or a particular user configured in the local user database on the
switch.
show user [username]
Syntax Definitions
username The name of the user. Used for logging into the switch.
Defaults
By default, all users are displayed if the username parameter is not specified with this command.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use this command to display information about read/write access and partitioned management access
(domains and families) or end-user profiles associated with users.
Examples
-> show user
User name = Customer1,
Password expiration = 10/27/2007 11:01 (30 days from now),
Password allow to be modified date = 9/30/2007 10:59 (3 days from now),
Account lockout = Yes (Automatically unlocked after 19 minute(s)from now),
Password bad attempts = 3,
Read Only for domains = None,
Read/Write for domains = Admin System Physical Layer2 Services policy Security ,
Read/Write for families = ip rip ip-routing ipmr ipms ,
Snmp allowed = YES,
Snmp authentication = SHA,
Snmp encryption = DES
User name = admin,
Password expiration = 10/27/2007 11:01 (30 days from now),
Password allow to be modified date = 9/30/2007 10:59 (3 days from now),
Account lockout = None,
Password bad attempts = 0,
Read Only for domains = None,
Read/Write for domains = All ,
Snmp allowed = NO
User name = j_smith,
Password expiration = 10/27/2007 11:01 (30 days from now),
Password allow to be modified date = 9/30/2007 10:59 (3 days from now),
Account lockout = Yes (Automatically unlocked after 19 minute(s)from now),
Password bad attempts = 3,
END user profile = u_profile1,
Snmp allowed = YES,
Snmp authentication = SHA,
Snmp encryption = DES
To Next Page
Loading...
