802.1X Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 44-19
Examples
-> 802.1x 3/1 captive-portal policy authentication pass vlan 100 block fail vlan 10
-> 802.1x 4/1 captive-portal policy authentication pass group-mobility
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaDot1xAuthPolicyTable
alaDot1xCaptivePortalPolicy
802.1x supplicant policy
authentication
Configures 802.1x authentication device classification policies for sup-
plicants.
802.1x non-supplicant policy Configures device classification policies that do not perform 802.1x or
MAC authentication for non-supplicants.
802.1x captive-portal session-
limit
Configures the length of a Captive Portal session and the number of
login attempts allowed before the device is classified as a failed login.
show 802.1x device
classification policies
Displays device classification policies configured for an 802.1x port.
show 802.1x captive-portal
configuration
Displays the Captive Portal configuration information (session time
limit and the number of login retries) for the specified 802.1x port.
To Next Page
Loading...
