Alcatel-Lucent OmniSwitch 6250 - Show 802.1 X Statistics

802.1X Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 44-31
show 802.1x statistics
Displays statistics about all 802.1X ports or for a particular 802.1X port.
show 802.1x statistics [slot/port]
Syntax Definitions
slot The slot of the port for which you want to display 802.1X statistics.
port The port for which you want to display 802.1X statistics.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify a particular slot/port, information for each 802.1X port is displayed.
Examples
-> show 802.1x statistic 1/13
802.1x slot/port = 1/13
Last EAPOL frame source = 00:0d:0c:00:00:02
Last EAPOL frame version = 1,
EAPOL frames received = 3,
EAPOL frames transmitted = 3,
EAPOL start frames received = 1,
EAPOL logoff frames received = 0,
EAP Resp/Id frames received = 1,
EAP Response frames received = 1,
EAP Req/Id frames transmitted = 1,
EAP Req frames transmitted = 1,
EAP length error frames received = 0,
Invalid EAPOL frames received = 0,
output definitions
Slot The slot number of the 802.1X port.
Port The 802.1X port number.
Last EAPOL frame version The protocol version number carried in the most recently received
EAPOL frame.
Last EAPOL frame source The source MAC address carried in the most recently received EAPOL
frame.
EAPOL frames received
The number of valid EAPOL frames of any type that have been
received by the switch.