Switch Logging Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 45-9
swlog clear
Clears the files that store switch logging data.
swlog clear
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use this command when the switch logging display is too long due to some of the data being old or out
of date.
• This command can also be used on the secondary CMM.
Examples
-> swlog clear
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingClear
swlog output Enables or disables switch logging output to the console, file, or data
socket.
show log swlog Displays stored switch logging information from flash.
show swlog Displays switch logging information.
To Next Page
Loading...
