Alcatel-Lucent OmniSwitch 6250 - Page 2006

OmniSwitch 6250 CLI Reference Guide November 2009 page 12 RIP Commands
ip helper traffic-suppression {enable | disable}
ip helper dhcp-snooping {enable | disable}
ip helper dhcp-snooping mac-address verification {enable | disable}
ip helper dhcp-snooping option-82 data-insertion {enable | disable}
ip helper dhcp-snooping option-82 data-insertion format [base-mac | system-name | user-
string string]
ip helper dhcp-snooping bypass option-82-check {enable | disable}
ip helper dhcp-snooping vlan vlan_id [mac-address verification {enable | disable}] [option-82
data-insertion {enable | disable}]
no ip helper dhcp-snooping vlan vlan_id
ip helper dhcp-snooping port slot1/port1[-port1a] {block | client-only | trust}
ip helper dhcp-snooping port slot1/port1[-port1a] traffic-suppression {enable | disable}
ip helper dhcp-snooping port slot1/port1[-port1a] ip-source-filtering {enable | disable}
ip helper dhcp-snooping port binding {[enable | disable] | [mac_address
port slot/port
address ip_address lease-time time vlan vlan_id]}
no ip helper dhcp-snooping port binding mac_address port slot/port address ip_address
lease-time time vlan vlan_id
ip helper dhcp-snooping port binding timeout seconds
ip helper dhcp-snooping port binding action {purge | renew}
ip helper dhcp-snooping binding persistency {enable | disable}
ip helper boot-up {enable | disable}
ip helper boot-up enable {BOOTP | DHCP}
ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port [name
]}
no ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port}
ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port} vlan
vlan_id
no ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port} vlan
vlan_id
show ip helper
show ip helper stats
ip helper no stats
show ip helper dhcp-snooping vlan
show ip helper dhcp-snooping port
show ip helper dhcp-snooping binding
show ip udp relay service [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP |
port]
show ip udp relay [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]
show ip udp relay destination [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP |
NTP | port]
RIP Commands
ip load rip
ip rip status {enable | disable}
ip rip interface {interface_name}
no ip rip interface {interface_name}
ip rip interface {interface_name} status {enable | disable}
ip rip interface {interface_name} metric value
ip rip interface {interface_name} send-version {none | v1 | v1compatible | v2}
ip rip interface {interface_name} recv-version {v1 | v2 | both | none}
ip rip force-holddowntimer seconds
ip rip host-route
no ip rip host-route
ip rip route-tag value
ip rip interface {interface_name} auth-type {none | simple | md5}
ip rip interface {interface_name} auth-key string
ip rip update-interval seconds
ip rip invalid-timer seconds
ip rip garbage-timer seconds
ip rip holddown-timer seconds
show ip rip
show ip rip routes
[ip_address ip_mask]
show ip rip interface [interface_name]
show ip rip peer [ip_address]
Port Mirroring and Monitoring Commands
port mirroring port_mirror_sessionid [no] source slot/port[-port2] [slot/port[-port2]...]
destination slot/port [rpmir-vlan vlan_id] [bidirectional |inport |outport] [unblocked
vlan_id]
[enable | disable]
port mirroring port_mirror_sessionid {enable | disable}
no port mirroring port_mirror_sessionid {enable | disable}
port monitoring port_monitor_sessionid source slot/port
[{no file | file filename [size filesize] | [overwrite {on | off}]}]
[inport | outport | bidirectional] [timeout seconds] [enable | disable]
port monitoring port_monitor_sessionid {disable | pause | resume}
no port monitoring port_monitor_sessionid
show port mirroring status [port_mirror_sessionid]
show port monitoring status [port_monitor_sessionid]
show port monitoring file [port_monitor_sessionid]
RMON Commands
rmon probes {stats | history | alarm} [entry-number] {enable | disable}
show rmon probes [stats | history | alarm] [entry-number]
show rmon events [event-number]