Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-51
show command-log status
Shows the current status of the command logging function (i.e., enabled or disabled). For more informa-
tion on enabling and disabling command logging, refer to the command-log command on page 6-24.
show command-log status
Syntax Definitions
N/A
Defaults
Command logging is disabled by default.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show command-log status
CLI command logging : Enable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionCliCommandLogStatus
output definitions
CLI command logging The current status of command logging on the switch. Options include
Disable and Enable. Disable indicates that the command logging func-
tion is currently disabled (default). Enable indicates that the command
logging function has been enabled via the command-log command.
For more information, refer to page 6-24.
command-log Enables or disables command logging on the switch.
show ssh config Displays the contents of the command.log file.
To Next Page
Loading...
