File Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 7-3
cd
Changes the switch’s current working directory.
cd [path]
Syntax Definitions
path Specifies a particular working directory. If no path is specified, the
switch’s working directory is changed to the top level.
Defaults
The switch’s default working directory is /flash.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Up to 255 characters may be used for a fully qualified path.
• A path can contain up to a maximum of seven (7) directories, including /flash.
• As with files names, up to thirty-two (32) characters may be used for a directory name.
• File and directory names can include only the following character types: a-z, A-Z, 0-9, dashes (-),
dots (.), and underscores (_).
• This command can also be used on the secondary CMM.
Examples
-> cd
-> cd test_path
Release History
Release 6.6.1; command was introduced.
To Next Page
Loading...
