Web Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 8-3
http ssl
Enables/disables Force SSL on the switch. SSL is a protocol that establishes and maintains secure commu-
nication between SSL-enabled servers and clients across the Internet.
{[ip] http | https} ssl
no {[ip] http | https} ssl
Syntax Definitions
ip Optional syntax. Using this optional syntax is the same as using the http
ssl command.
Defaults
SSL is enabled by default.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to disable SSL.
Examples
-> http ssl
-> no http ssl
-> https ssl
-> no https ssl
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaInd1WebMgtSsl
http server Enables/disables web management on the switch.
show http Displays web management configuration information.
To Next Page
Loading...
