Alcatel-Lucent OmniSwitch 6250 - Show Snmp Authentication Trap

SNMP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 10-29
show snmp authentication trap
Displays the current authentication failure trap forwarding status (i.e., enable or disable).
show snmp authentication trap
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show snmp authentication trap
snmp authentication trap = disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionAuthenticationTrap
snmp authentication trap Enables or disables SNMP authentication failure trap forwarding.