CMM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 1-3
• This command can also be used on the secondary CMM.
Examples
-> reload
-> reload primary
-> reload primary in 15:25
-> reload primary at 15:25 august 10
-> reload primary at 15:25 10 august
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
chasEntPhysicalTable
csEntPhysicalIndex
chasEntPhysAdminStatus
chasControlRedundantTable
chasControlDelayedRebootTimer
reload working Immediate primary CMM reboot to the working software configuration
without secondary CMM takeover.
To Next Page
Loading...
