CMM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 1-5
• If the switch is a part of a stacked configuration, using this command synchronizes the working direc-
tories of all the switches in the stack to the working directory of the primary CMM switch.
Examples
-> reload working rollback-timeout 5
-> reload working no rollback-timeout
-> reload working no rollback-timeout in 50
-> reload working rollback-timeout 10 at 12:50
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
chasControlModuleTable
csEntPhysicalIndex
chasControlActivateTimeout
reload Reboots the CMM to its startup software configuration.
To Next Page
Loading...
