802.1AB Commands
page 13-24 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
lldpLocalSystemData
lldpLocChassisIdSubtype
lldpLocChassisId
lldpLocSysName
lldpLocSysDesc
lldpLocSysCapSupported
lldpLocSysEnabled
lldpPortConfigTable
lldpMessageTxInterval
lldpMessageTXHoldMultiplier
lldpTxDelay
lldpReinitDelay
lldpNotificationInterval
lldpLocManAddrTable
lldpLocManAddrSubtype
lldpLocManAddr
LLDPDU Transmit Delay The minimum transmit time between successive LLDPDUs.
Reintialization Delay The minimum time interval before the reinitialization of local port
objects between port status changes.
MIB Notification Interval The minimum time interval between consecutive notifications of local
system MIB change.
Management Address Type The type of management address used in LLDPDU.
Management IP Address The management IP address. The loopback0 IP address is configured
for the management IP address to be transmitted.
lldp reinit delay Sets the time interval that must elapse before the current status of a port
is reinitialized after a status change.
lldp transmit hold-multiplier Sets the transmit hold multiplier value, which is used to calculate the
Time To Live TLV.
lldp transmit delay Sets the minimum time interval between successive LLDPDUs trans-
mitted.
output definitions (continued)
To Next Page
Loading...
