Alcatel-Lucent OmniSwitch 6250 - Show Lldp Local-Management-Address

802.1AB Commands
page 13-30 OmniSwitch 6250 CLI Reference Guide November 2009
show lldp local-management-address
Displays the local management address information.
show lldp local-management-address
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show lldp local-management-address
Local LLDP Agent Management Address:
Management Address Type = 1 (IPv4),
Management IP Address = 10.255.11.100
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
lldpLocManAddrTable
lldpLocManAddrLen
lldpLocManAddrIfSubtype
lldpLocManAddrIfId
output definitions
Management Address Type The address type used to define the interface number (IPv4 or IPv6).
Management IP Address The management IP address. The loopback0 IP address is configured
for the management IP address to be transmitted.
lldp tlv management Specifies the switch to control per port management TLVs to be incor-
porated in the LLDPDUs.
show lldp local -system Displays local system information.