Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-9
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsProtocolSpecification
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge protocol Implicit command for changing the Spanning Tree protocol for the flat
mode instance or for a 1x1 mode VLAN instance.
bridge 1x1 protocol Explicit command for changing the Spanning Tree protocol for a VLAN
instance.
To Next Page
Loading...
