Distributed Spanning Tree Commands
page 16-32 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsBridgeHelloTime
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge hello time Implicit command for changing the Spanning Tree hello time value for
the flat mode CIST instance or for a 1x1 mode VLAN instance.
bridge 1x1 hello time Explicit command for changing the Spanning Tree hello time value for a
VLAN instance when the switch is operating in either the flat or 1x1
mode.
To Next Page
Loading...
