Distributed Spanning Tree Commands
page 16-38 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsBridgeMaxAge
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge max age Implicit command for changing the Spanning Tree max age time value
for the flat mode CIST instance or for a 1x1 mode VLAN instance.
bridge 1x1 max age Explicit command for changing the Spanning Tree max age time value
for a VLAN instance when the switch is operating in either the flat or
1x1 mode.
To Next Page
Loading...
