Distributed Spanning Tree Commands
page 16-42 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsMode
vStpInsBridgeForwardDelay
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge cist forward delay Explicit command for changing the Spanning Tree forward delay time
value for the CIST instance when the switch is operating in either the
flat or 1x1 mode.
bridge 1x1 forward delay Explicit command for changing the Spanning Tree forward delay time
value for a VLAN instance when the switch is operating in either the flat
or 1x1 mode.
bridge rrstp ring vlan-tag Displays VLAN Spanning Tree parameter values.
To Next Page
Loading...
