Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-73
• If a 16-bit path cost value is in use and the path_cost for a link aggregate is set to zero, the following
default values based on link speed and link aggregate size are used. Note that for Gigabit ports the
aggregate size is not applicable in this case:
Examples
-> bridge mode flat
-> bridge cist 4/1 path cost 19
-> bridge cist 16 path cost 12000
-> bridge mode 1x1
-> bridge cist 5/10 path cost 19
-> bridge cist 11 path cost 12000
Release History
Release 6.6.1; command was introduced.
Link Speed
Aggregate Size
(number of links)
Default Path
Cost Value
10 Mbps 2 60
440
830
100 Mbps 2 12
49
87
1 Gbps N/A 3
10 Gbps N/A 1
To Next Page
Loading...
