Distributed Spanning Tree Commands
page 16-102 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> bridge mode flat
-> bridge cist 15 restricted-role on
-> bridge cist 8/23 root-guard disable
-> bridge mode 1x1
-> bridge cist 2/2 root-guard enable
-> bridge cist 10 restricted-role off
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortRestrictedRole
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge 1x1 slot/port restricted-
role
Configures the restricted role status for a port or an aggregate of ports
for the 1x1 mode VLAN instance.
To Next Page
Loading...
