Distributed Spanning Tree Commands
page 16-108 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> bridge mode flat
-> bridge 1x1 2 15 restricted-tcn on
-> bridge 1x1 255 8/23 restricted-tcn disable
-> bridge mode 1x1
-> bridge 1x1 5 2/2 restricted-tcn enable
-> bridge 1x1 255 10 restricted-tcn off
Release History
Release 6.1.3; command was introduced.
Related Commands
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortRestrictedTcn
bridge mode Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
bridge cist slot/port restricted-
tcn
Configures the restricted TCN status for a port or an aggregate of ports
for the flat mode Common and Internal Spanning Tree (CIST).
To Next Page
Loading...
