Chassis Management and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 2-5
system location
Specifies the switch’s current physical location. If you need to determine the switch’s location from a
remote site, entering a system location can be very useful.
system location text_string
Syntax Definitions
text_string The switch’s physical location. For example, TestLab. The system
location can range from 1 to 254 characters in length. Text strings that
include spaces must be enclosed in quotation marks. For example,
“NMS Test Lab”.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> system location "NMS Test Lab"
-> system location TestLab
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
system
systemLocation
system contact Specifies the switch’s administrative contact (e.g., an individual or a
department).
system name Modifies the switch’s current system name.
show system Displays the basic system information for the switch.
To Next Page
Loading...
