Distributed Spanning Tree Commands
page 16-162 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpMstRegionTable
vStpMstRegionNumber
vStpMstRegionConfigDigest
vStpMstRegionConfigName
vStpMstRegionConfigRevisionLevel
vStpMstRegionCistInstanceNumber
vStpMstRegionMaxHops
Revision Max hops The number of maximum hops authorized for region information. Con-
figured through the bridge mst region max hops command.
Cist Instance Number The number of the CIST instance, which is currently zero as there is
only one region per switch. Therefore, only one CIST exists per switch
Note that this instance is also known as the flat mode instance and is
known as bridge 1 when using STP or RSTP.
show spantree msti vlan-map Displays the range of VLANs associated to the specified MSTI.
show spantree cist vlan-map Displays the range of VLANs associated to the CIST instance.
show spantree map-msti Displays the MSTI that is associated to the specified VLAN
output definitions (continued)
To Next Page
Loading...
