EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6250 - Page 639

Alcatel-Lucent OmniSwitch 6250
2018 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Source Learning Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 18-11
Examples
-> show mac-address-table
Legend: Mac Address: * = address not valid
Vlan Mac Address Type Protocol Operation Interface
------+-------------------+--------------+-----------+------------+-----------
1 00:00:00:00:00:01 learned 0800 bridging 8/ 1
1 00:d0:95:6a:73:9a learned aaaa0003 bridging 10/23
Total number of Valid MAC addresses above = 2
-> show mac-address-table 10-15
Legend: Mac Address: * = address not valid
Vlan Mac Address Type Protocol Operation Interface
------+-------------------+--------------+-----------+------------+-----------
10 00:00:00:00:00:01 learned 0800 bridging 1/2
10 00:d0:95:6a:73:9a learned aaaa0003 bridging 1/2
11 00:d0:95:a3:e0:0d learned --- bridging 1/3
11 00:d0:95:a3:e5:09 learned --- bridging 1/3
11 00:d0:95:a3:e7:75 learned --- bridging 1/4
12 00:d0:95:a3:ed:f7 learned --- bridging 2/1
12 00:d0:95:a8:2a:b6 learned --- bridging 2/1
12 00:d0:95:ad:e3:cc learned --- bridging 2/1
13 00:d0:95:ae:3b:f6 learned --- bridging 2/8
13 00:d0:95:b2:3d:fa learned --- bridging 2/8
Total number of Valid MAC addresses above = 14
Release History
Release 6.6.1; command was introduced.
output definitions
VLAN Vlan ID number associated with the MAC address and slot/port.
Mac Address MAC address that is currently learned or statically assigned.
Type MAC address management status: learned or permanent. Use the
mac-address-table command on page 18-2 to configure the manage-
ment status for a static MAC address.
Protocol Protocol type for the MAC address entry. Note that if the hardware
source learning mode is active for the port, this field is blank.
Operation The disposition of the MAC address: bridging (default) or filtering.
Use the mac-address-table command on page 18-2 to configure the
disposition for a static MAC address.
Interface The slot number for the module and the physical port number on that
module that is associated with the static or dynamically learned MAC
address. If the interface is a link aggregate ID, zero is displayed as the
slot number (e.g., 0/29).

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6250

Related product manuals