Source Learning Commands
page 18-20 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced
Related Commands
Related MIB Objects
slMacAddressTable
slMacLearningControlTable
slMacLearningControlEntry
slMacLearningControlStatus
output definitions
port The slot/port number for a switch port or a link aggregate ID number. If
the interface is a link aggregate ID, zero is displayed as the slot number
(e.g., 0/29).
source-learning The source learning status of the port or link aggregate (enabled or
disabled). Configured through the source-learning command.
source-learning Configures the status of source MAC address learning on a single
port, a range of ports or on a link aggregate of ports.
To Next Page
Loading...
