Learned Port Security Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 19-5
Examples
-> port-security shutdown 25
-> port-security shutdown 60
-> port-security shutdown 2 convert-to-static enable
-> port-security shutdown 2 convert-to-static disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
learnedPortSecurityGlobalGroup
lpsLearningWindowTime
lpsLearningWindowTimeWithStaticConversion
port-security Enables or disables Learned Port Security (LPS) on the switch port(s).
port-security mac Configures a single authorized source MAC address for a port that
belongs to a specified VLAN.
port-security mac-range Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
port-security maximum Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
port-security violation Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
To Next Page
Loading...
