Learned Port Security Commands
page 19-12 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
learnedPortSecurityL2MacAddressTable
lpsL2MacAddress
lpsL2VlanId
lpsL2MacAddressRowStatus
port-security Enables or disables Learned Port Security (LPS) on the switch port(s).
port-security mac-range Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
port-security shutdown Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
port-security maximum Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
port-security violation Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
To Next Page
Loading...
