Chassis Management and Monitoring Commands
page 2-16 OmniSwitch 6250 CLI Reference Guide November 2009
update lanpower
Uploads new firmware to the POE controller. Please contact your Alcatel-Lucent support representative
before using this command.
update lanpower {lanpower_num | all}
Syntax Definitions
lanpower_num The POE unit number to update.
all Updates all POE units in the switch.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> update lanpower 3
-> update lanpower all
Release History
Release 6.6.1; command was introduced.
Related Commands
update Updates the versions of Uboot, FPGA, BootROM, or Miniboot.
To Next Page
Loading...
