Alcatel-Lucent OmniSwitch 6250 - Page 684

Ethernet Port Commands
page 20-12 OmniSwitch 6250 CLI Reference Guide November 2009
• If autonegotiation is disabled, the configured flow control settings are applied to the local interface.
Examples
-> interfaces 1 tx-and-rx
-> interfaces 3/1-6 pause rx
-> interfaces 3/1-6 disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfigTable
esmPortCfgFlow
dot3PauseTable
dot3PauseAdminMode
Configured
Local Tx
Configured
Local Rx
Configured
Remote Tx
Configured
Remote Rx
Operational
Local Tx
Operational
Local Rx
No No No No No No
Ye s Yes Ye s Yes Yes Ye s
Yes No Yes No No No
No Ye s No Yes Yes Ye s
No No No Yes No No
Ye s Ye s No No No No
YesNoYesYesNoNo
No Ye s Ye s No No Yes
No No Yes No No No
Ye s Ye s No Ye s Yes Ye s
YesNoNoNoNoNo
No Ye s Ye s Yes Yes Ye s
No No Yes Yes No No
Ye s Ye s Yes No No No
YesNoNoYesYesNo
No Ye s No No No No
interfaces hybrid pause Configures flow control settings for combo ports.
show interfaces pause Displays interface flow control settings.