Ethernet Port Commands
page 20-14 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> interfaces 3/1 duplex auto
-> interfaces 3 duplex half
-> interfaces 3/1-4 auto
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
esmConfTable
esmPortAutoDuplexMode
interfaces speed Configures interface line speed. Set to auto to set speed and duplex
mode to auto-sensing.
show interfaces status Displays interface line settings (e.g., speed, and mode).
To Next Page
Loading...
