Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-39
Release History
Release 6.6.1; command was introduced.
Related Commands
Rx Alignments Err Number of Alignments Error frames received.
Bytes Xmitted Number of Bytes transmitted.
Tx Unicast Frames Number of unicast frames transmitted.
Tx Broadcast Frames Number of broadcast frames transmitted.
Tx M-cast Frames Number of multicast frames r transmitted.
Tx Undersize Frames Number of undersized frames transmitted.
Tx Oversize Frames Number of oversized frames transmitted.
Tx Lost Frames Number of Lost Frames transmitted.
Tx Collided Frames Number of collision frames received or transmitted.
Tx Error Frames Number of error frames transmitted.
show interfaces accounting Displays interface accounting information (e.g., packets received/
transmitted).
show interfaces counters Displays interface counter information (e.g., unicast packets
received/transmitted).
show interfaces counters errors Displays interface error frame information (e.g., CRC errors, transit
errors, and receive errors).
show interfaces collisions Displays interface collision information (e.g., number of collisions
and number of retries).
show interfaces status Displays the interface line settings (e.g., speed and mode).
show interfaces traffic Displays interface traffic statistics (input/output bytes and packets).
output definitions (continued)
To Next Page
Loading...
